Suspension Shop Services
Velocity Calibrations provide motorcycle suspension services for sportbike, dirtbike, Harley-Davidson/V-Twin, and more. We service OEM suspension components, Ohlins, K-Tech, Bitubo, and other aftermarket manufactures.
We are factory trained from multiple manufactures to provide you with the highest quality of work. All suspension components we sell we also service and carry parts in house. This allows us to customize and service your suspension while we keep turnaround to a minmum.
If there is a service that you would like but don’t see it here, please contact us for more info.
SUSPENSION SERVICES
-
Suspension Removal/Install
If a bike is dropped off at our location, we will remove and install the forks and/or shock. This service cost is in addition to any suspension services provided below.
-
Fork Refresh
Internal components are removed from fork tubes and tubes are split. Fork tubes, internal components, and valving are inspected for premature wear and/or damage. All components are cleaned via ultrasonic solutions and are assembled. Wearable items like seals, oil, bushings and other parts are replaced during assembly.
-
Shock Refresh
- Shock is dissasembled and inspected for wear and or damage. Hydraulic preload adjusters are dissasembled. All components are cleaned via ultrasonic solutions and are assembled via vacuum pump. Wearable items like seals, oil, bushings and other parts are replaced during assembly. Shock is refilled with nitrogen.
-
Fork Valve Install
Internal components are removed from fork tubes and tubes are split. Fork tubes, internal components, and valving are inspected for premature wear and/or damage. All components are cleaned via ultrasonic solutions and new valving is installed. Wearable items like seals, oil, bushings and other parts are replaced during assembly.
-
Fork Cartridge Install
Internal components are removed from fork tubes and tubes are split. Fork tubes, inspected for premature wear and/or damage. Fork tubes are cleaned via ultrasonic solutions and the new cartridge is installed. Wearable items like seals, oil, bushings and other parts are replaced during assembly.
-
Damper Refresh
Damper is disassembled and is inspected for wear and/or damage. Components are cleaned via ultrasonic solutions. Damper is vacuum pumped and filled with new oil.
-
Kawasaki OEM Damper Rebuild
Damper is disassembled and is inspected for wear and/or damage. Components are cleaned via ultrasonic solutions. The OEM needle and seat are replaced with a standard Ohlins needle and seat. Damper is filled with recommended Ohlins 1309-1 Oil via vacuum pump.
-
Other Services we provide –
Fork Lowering Trimple Clamp Installs Shock Lowering Triple Clamp Offset Install Bent Forks Analysis Rebuild “non-rebuildable” shocks Bent Shock Analysis Fork Repairs Fork Spring Swaps Shock Repairs Shock Spring Swaps Nitrogen Recharge Steering Damper Repair Lowering Link Install